XIKKART Lan Tester with Wire Tracker, Tester, Cable Tracker, RJ11 RJ45 Line Finder Cable Tester for Network LAN Ethernet Cable Collation, Phone Telephone Line Tester with 2X 9V Batteries(Multicolor)
Conquer the Cable Chaos: The Ultimate Deep Dive into the XIKKART Lan Tester with Wire Tracker
Introduction: The Essential Tool for the Modern Network
In today’s hyper-connected world, reliable networking is not a luxury—it is a necessity. From running a smart home to maintaining a corporate data center, the integrity of your network cables is the backbone of your digital life. When a connection fails, finding the fault in a messy tangle of wires behind a patch panel or within a wall can be an agonizing, time-consuming challenge. Network professionals and dedicated DIY enthusiasts alike need a tool that is precise, versatile, and, above all, reliable.
Enter the XIKKART Lan Tester with Wire Tracker, a multi-functional, 4-in-1 device engineered to master network maze. This compact, professional-grade kit is designed to seamlessly combine the functions of a comprehensive LAN cable tester and an accurate line finder. Compatible with essential connectors like RJ45 and RJ11, and powered by two included 9V batteries for maximum portability, the XIKKART tester transforms troubleshooting from a tedious process of trial and error into a quick, efficient diagnosis. It is the indispensable partner for any telecommunication engineer, cabling specialist, or security professional looking to ensure their network infrastructure is flawless.
Section 1: The Core Technology – Two Tools in One
The true genius of the XIKKART device is its integration of two essential functions—Cable Testing and Wire Tracking—into a single, handheld unit composed of an Emitter (Transmitter) and a Receiver (Probe). This combined capability provides a complete solution for both verifying the health of a cable and physically locating its endpoint.
1.1 The LAN Cable Tester (Emitter Unit)
The Emitter unit serves as a robust diagnostic tool for verifying the correct sequencing and health of your network and telephone cables. By plugging one end of a cable into the RJ45 or RJ11 port on the emitter, the device initiates an Automatic Scan Mode.
The key output is the LED Collation Sequence, where a series of LED lights (typically numbered 1 through 8, plus a Ground 'G' indicator) light up in sequence. This visual feedback instantly reveals the wiring status:
Perfectly Wired (T568A/B): The LEDs on both the Emitter and the separate Remote Unit light up in a perfect, continuous 1-to-8 sequence, confirming that all pairs are correctly connected and terminated.
Short Circuit: Two or more LEDs light up simultaneously, indicating an unintended electrical connection between those wires—a common cause of network failure.
Open Circuit (Break): The LED corresponding to a broken wire fails to light up, indicating a physical cut or a bad punch-down point in the cable run.
Miswire/Crossed Pairs: The sequence lights up in a scrambled or inverted order, confirming that the wire pairs have been incorrectly terminated at one or both ends.
This precise, non-destructive testing method is paramount for certifying freshly crimped patch cables or diagnosing faults in installed wall-run lines up to several hundred meters long.
1.2 The Wire Tracker (Receiver Unit/Probe)
The Receiver, or Wire Tracker Probe, is what allows you to physically locate the other end of a cable run. In a bundle of hundreds of unlabelled cables—common in server rooms or busy offices—finding the corresponding end of a cable connected to the Emitter is impossible without this feature.
When the Emitter is set to SCAN Mode (or TONE Mode), it injects an audible analog signal—a distinct high/low alternating tone—onto the connected wire pair. The Receiver unit is then used to trace the path of the cable, providing:
Audible Signal: The receiver detects the tone and emits a loud, clear sound (often with an included earphone jack for noisy environments).
Signal Strength Indication: The volume or LED brightness on the probe increases as it gets closer to the correct cable, allowing technicians to quickly isolate the target wire from a bundle.
This functionality is crucial for identifying cables that run behind false ceilings, under carpets, inside conduit, or are simply lost in a spaghetti mess of IT infrastructure.
Section 2: Multifunctional Diagnosis – Beyond Simple Continuity
The XIKKART Lan Tester excels because its capabilities extend far beyond basic connectivity checks. It integrates multiple specialized functions that make it a truly comprehensive tool for all low-voltage wiring.
2.1 Comprehensive Cable Fault Detection
The ability to accurately diagnose multiple fault types simultaneously is a major time-saver. The tester is designed to quickly check:
Continuity Testing (CONT Mode): Using the provided alligator clip adapter, the emitter can test the continuity of non-network metal wires, such as speaker wires, alarm cables, or standard electrical conductors (must be powered off). This function checks for complete circuits and resistance.
Shorts and Opens: As noted in the collation test, these are the two most frequent cable faults, and the XIKKART pinpoints them instantly, saving hours of visual inspection.
Reverse Connection: The collation sequence reveals if the polarity of the cable pairs has been reversed, which can cause intermittent or degraded network performance.
2.2 Dedicated Telephone Line Testing (TONE Mode)
Telephone lines (RJ11) require specific testing, particularly for polarity and operational status. The XIKKART Tester provides detailed diagnostics for 2-wire and 4-wire telephone systems:
Line Status Insight: It can identify whether a telephone line is Idle (clear ringing), Ringing, or Off-Hook (busy), helping to troubleshoot service issues instantly.
Polarity (TIP and RING) Determination: The device uses indicator lights (often red/green) to determine the positive (TIP) and negative (RING) polarity of the DC level in the line, which is essential for correct connection of traditional telephone equipment.
2.3 Live Line Detection and Safety
The XIKKART unit features the ability to detect low-voltage live cables (usually up to 10V or specific low-current devices). This is critical in modern networks:
Tracing on Live Low-Current Networks: It can trace the target cable even when it is connected to a weak current device like a router, PC terminal, or an Ethernet switch, saving the time required to power down active components.
Anti-Burning/Anti-Interference: While designed for low-voltage applications, the robust design often includes protection against transient current spikes, enhancing the tool's longevity and reliability in complex environments.
Section 3: Practical Application and Workflow Efficiency
The greatest benefit of the XIKKART Lan Tester is the dramatic improvement in workflow efficiency for both professionals and hobbyists.
3.1 Streamlined Installation and Verification
During new network installation, the XIKKART allows an installer to verify their work immediately after terminating a cable end.
Preparation: Crimp the RJ45 connector onto a Cat5e/Cat6 cable.
Testing: Plug the completed cable into the Emitter and the corresponding Remote Unit.
Verification: Check the LED sequence. A perfect 1-8 sequence means the cable is ready for deployment. This instant feedback prevents installers from running faulty lines through walls or ceilings, saving costly rework later.
3.2 Rapid Troubleshooting in Data Centers and Offices
In maintenance scenarios, the wire tracking function shines:
Identify the Source: A technician finds a non-functioning network jack (e.g., in an office wall).
Attach the Tone: The Emitter is connected to the wall jack (RJ45 or RJ11).
Trace the Path: The technician uses the Receiver/Probe to trace the cable run back to the network closet or patch panel. The distinct tone allows them to quickly distinguish the single target cable from dozens or hundreds of others.
Pinpoint the Fault: Once the cable is identified, the technician can perform a full collation test on the identified cable to diagnose if the fault is a simple miswire, a break, or a short circuit, allowing for targeted repair or replacement. This eliminates the need for expensive, high-end time domain reflectometers (TDRs) for most basic troubleshooting tasks.
3.3 Kit and Portability Advantage
The value proposition of the XIKKART Kit is enhanced by its thoughtful design and included accessories:
Battery Powered: Operated by 2 x 9V batteries (often included), the device offers true portability without reliance on external power.
All-in-One Package: The kit often includes the Emitter, Receiver, RJ45 and RJ11 adapters, and an Alligator Clip adapter, ensuring compatibility with virtually every common low-voltage wiring system.
Durable and Compact: The tool is lightweight (around 300-350 grams) and built from durable ABS plastic, making it easy to carry in a toolkit and resistant to the rigors of field use.
Conclusion: Your Solution to Cable Confusion
The XIKKART Lan Tester with Wire Tracker is a powerful testament to efficiency and versatility in network maintenance. It brilliantly unifies essential cable testing and locating features into a single, intuitive, and highly functional device. It eliminates the guesswork and wasted time associated with tracing and diagnosing cable faults, whether you are dealing with a complex corporate network or setting up a reliable home office.
By providing instant, accurate feedback on wiring faults (shorts, opens, miswires) and the ability to track cables over long distances, this tool empowers network professionals, telecommunication specialists, and even technical-minded homeowners to maintain robust, reliable, and high-performing connections. Investing in the XIKKART tester is not just buying a tool; it is investing in the health and longevity of your entire wired infrastructure. Take control of your cable chaos and elevate your maintenance game with the definitive 4-in-1 LAN testing solution.
Disclaimer: This review is based on personal experience and may vary depending on individual usage and preferences.
This blog post is for informational purposes only and does not endorse or promote any specific brand or product.
This is a general overview and may not reflect specific individual experiences.
Sponsorship
Sponsor Key-Word
"This Content Sponsored by SBO Digital Marketing.
Mobile-Based Part-Time Job Opportunity by SBO!
Earn money online by doing simple content publishing and sharing tasks. Here's how:
- Job Type: Mobile-based part-time work
- Work Involves:
- Content publishing
- Content sharing on social media
- Time Required: As little as 1 hour a day
- Earnings: ₹300 or more daily
- Requirements:
- Active Facebook and Instagram account
- Basic knowledge of using mobile and social media
For more details:
WhatsApp your Name and Qualification to 9994104160
a. Online Part Time Jobs from Home
b. Work from Home Jobs Without Investment
c. Freelance Jobs Online for Students
d. Mobile Based Online Jobs
e. Daily Payment Online Jobs
Keyword & Tag:
#OnlinePartTimeJob #WorkFromHome #EarnMoneyOnline #PartTimeJob #jobs #jobalerts #withoutinvestmentjob"
No comments:
Post a Comment